This industry consists of factories (and their suppliers) that process heavy oil and chemicals into semi-finished and finished products. Chemical plants can vary enormously in terms of products and processes. However, safety and continuity of production processes are always important. Our range of corrosion prevention products ensures both.
For example, some factories have safety requirements imposed by their insurer and flanges must be covered. Our Flangebelt or Sprayguard can be used for this. Our vapour barriers and sealants ensure no moisture can enter the multi-layer insulation systems which are typically used in cold/cryogenic installations.
TEMBUTIL-316 is a self-adhesive, heavy duty jacketing foil, used in (petro-)chemical and cryogenic installations (LNG) or other sites where insulation is traditionally covered with stainless steel jacketing/ cladding for mechanical protection. Tembutil-316 is suited for use in coastal areas. Typical use of TEMBUTIL-316 is to provide mechanical protection to insulation materials. Due to its self-adhering […]
Vessel Inspection Plug – V.I.P.
The Vessel Inspection Plug (V.I.P.) makes non-destructive vessel inspection possible making inspection more (cost)efficient. Vessel inspection plugs help to prevent Corrosion under Insulation (C.U.I.) by providing a weather-tight seal.Frequently Asked Questions about VIP
Flensbeschermers – Protectem Flangebelts
Protectem Flangebelts protect: – flanges and gaskets from outside weathering and chemical conditions. – plant, equipment and personnel from leaking hazardous substances. – plant, equipment and personnel form pressure spray due to a gasket blow-out. Protectem Flangebelts create: – leak detection and a drainage in insulated flange pairs. – possibility to commence pressure testing on […]
Foster Flextra Sealant is an off-white, one component, elastomer based product used as a vapour barrier sealant in the joints of cellular glass and urethane foam board stock insulations.It remains soft and flexible, preventing damage to the insulation due to thermal cycling through a wide range of temperatures.Operating temperature: on urethane foam -163 to 93°C, […]